Tech

5 Tricks To Improve Network Signals Of Tplink Deco M9 WiFi System

The tp-link Deco M9 is a whole-home mesh WiFi system that provides whole-home coverage with high-power network speed. It comes along with...

· 3 min read >
Deco M9 WiFi system

The tp-link Deco M9 is a whole-home mesh WiFi system that provides whole-home coverage with high-power network speed. It comes along with a three-deco unit that works perfectly. With this device, you can easily access high-speed network connectivity. The three Deco P9 units deliver you up to 6000 square feet of WiFi network coverage. The wireless speeds up to 1200 Mb/s with WiFi 5 network. The 802.11ac network is enhanced in this WiF system that totally eliminates the WiFi dead spot. The tp-link Deco M9 WiFi system completely helps penetrate thick walls, each Deco P9 unit transmits data to each other at Gigabit speed through your home’s existing power lines. The parenteral function is available that manage, limit and monitor internet use with parental controls that let you customize WiFi access for every person and device in your home. 

The Deco whole-home WiFi system absolutely works with Amazon Alexa. You can use the Alexa app and easily connect it. With this device, you can operate the WiFi system by your voice. If you wish to enhance the network signals then you should manage the wireless setting. But to visit in the wireless setting you can access the tp link deco login page. Without this page, you cannot log in to the account & nor configure the wireless setting. 

How to improve network signals of Tp-link Deco M9 WiFi System?

The Deco WiFi system works with mesh network technology. This technology perfectly provides whole-home WiFi. The deco mesh unit provides seamless network coverage and your device stays connected. But occasionally the network signals are slow and then the user faces issues. There are some reasons that network signals are slow. These reasons are as follows:

  • Outdated deco unit firmware 
  • Not add more unit
  • Disable 5GHz network
  • Not configure the deco unit setting

Unusual trick to improve Network Signals Of Tplink Deco M9 WiFi System

If the weak signals come with this deco unit then you can find out the issue. If you wish to improve the weak signals then you should follow some steps. In the given below, there are some tricks to properly improve the network signals.

Add more mesh point

If you wish to improve the network signals of the mesh WiFi system then you can add more mesh points. Because a single mesh point unit cannot improve network signals. With the one mesh unit, you cannot enjoy seamless network coverage. To remove the dead spot & enjoy high-speed network signals you can add more mesh points. With the deco app, you can easily add more mesh units. You can install the deco app and then log in to the account by using the username & password. Then, visit the setting and select the add mesh point option. Under this option, you can tap add a unit option. Then, the list appears you can select the mesh point unit and tap the done option. Now, more mesh points are completely added to the WiFi system. After that, network signals are accurately improved in a quick manner. 

Configure the mesh deco unit setting

Many times, the setting of the Deco M9 mesh WiFi system is not configured then the network signals are weak. If you wish to improve the wireless signals then you should configure the wireless setting. To configure the wireless setting, you can open the web interface. In the search field of the web interface, you can input an IP address. Then, visit the login window and log in to the account by using the password. Now, you can visit the setting and select the wireless setting. Under this setting, you should verify the wireless security. If this security is to disable then you should enable it. After that, the network signals are improved in a quick manner. 

Upgrade the deco unit firmware

Sometimes, the firmware version of the deco unit is outdated then the network signals are weak. To improve the network signals you should verify the firmware version. You can open the web interface and then access the login window by using our web address. You can visit the advanced setting of this deco unit. Under this setting, you can select the firmware upgrade option. Then, verify the latest firmware file in your device. By using this file, you can access the latest deco p9 firmware update. After that, the network signals properly improve it. 

Disconnect extra devices from the Deco M9 WiFi System

Sometimes, at a time 30 more devices are connected to the deco unit. To improve the network signal you can disconnect the extra device from the deco unit. You can easily disconnect the extra device from the deco unit by changing the network password. You can visit the setting and select the password option. With this option, you can enter the new password in their field. After that, click the save option and accurately save this setting. Now the network password is a change to this WiFi system. 

Change the wireless channel

Sometimes, you configure the wrong wireless channel due to network signals being weak. If you wish to improve the network signals then you can properly configure the correct wireless channel. You can visit in the wireless setting of the deco unit. Under the wireless setting, you can select the channel option. Then, you can configure the correct wireless channel of this WiFi system. Now the network signals completely improve in an accurate way.

Orange Light On Belkin N450 N+ Router? 5 Quick Ways To Fix It!

Challenges and Risks of Cloud Security 2022

in Tech
  ·   3 min read
find duplicate files

How to Delete Duplicate Files from Windows 10, 11 

in Tech
  ·   2 min read
Why are my screenshots blurry and of bad quality?

Why are my screenshots blurry and of bad quality?

in Tech
  ·   3 min read

One Reply to “5 Tricks To Improve Network Signals Of Tplink Deco M9 WiFi System”

Leave a Reply

Your email address will not be published.