Tech

How to Create a Guest Network on the TPLink AC1200 WiFi Router?

Want to Create a Guest Network on the TPLink AC1200 WiFi Router? Hello, I am Joseph from California, United States. I work...

· 2 min read >
TPLink AC1200 WiFi router

Want to Create a Guest Network on the TPLink AC1200 WiFi Router? Hello, I am Joseph from California, United States. I work as a supervisor in my office. All the good things as well as bad things I have to see. It’s my duty to deal with the problems that happen related to the hardware. But for the past two days, my office employees have been facing an internet connection issue. I checked the router configuration and then reset it. But nothing works. I finally called my ISP to confirm the connection. He came into my office and said there is nothing wrong with the internet connection, but with the router. He said our office router is outdated and I had to purchase a new one. 

Then I started looking at the digital platform and found a TPLink AC1200 WiFi router. I finally purchased it and installed it in my office. It is working pretty fine. TPLink AC1200 WiFi Router is a complete entertainment hub. It supports up to many devices with its MU-MIMO technology. There is nothing wrong with speed. In fact, it increases the emerging speed of around 1200 MBps by both bands.  Now we tell you the tips to position your TPLink WiFi router to get the best network range.

Position For TPLink AC1200 WiFi router 

Note that the router provides the best signal if it is set in the correct location. Not only for the signal, but it is also important to put it on the spot for safety purposes. After that, you can understand the TP-link ac1200 setup guide from the user guide. But before that, you must have to position your router.

Avoid Moisture or Other Wet Things

Try not to put them where it can endanger extreme moisture or heat. Do not place the TPLInk device around the device exposing heat. Avoid putting the router on the bathroom, toilet, kitchen, etc.

Place in Mid Way

Put the TPLink device in the middle of the PC or other WiFi-connected device and AC joint. The distance between both should not be unequal. The WiFi device should not be farther than 23 feet. Otherwise, it may provide a weak signal.

Check Hardware Connections

Get sure that the wire and the adapter are securely put out the path so that it does not build a tripling danger.

Smooth Surface

Put the router on a level and plane horizontal surface. Do not set the router over the shelf covering it with clothes. The router while operating may get heat and the chances of catching the fire increase.

Away From Other Devices

Evade putting the TPLink router close to them around the strong electromagnetic radiation and device with electromagnetic sensors. Do not set other WiFi-enabled devices close to it. It may slow down your network speed.

Evade Obstacles

Evade the barriers while setting the TLink device. These obstacles are mirrors, metal objects, glasses, thick concrete walls, etc. All these obstacles act as barriers and therefore, slow down the speed as well as network range. Now we tell you the steps to create a guest network on your TPLink WiFi network.

How to Create a Guest Network on the TPLink AC1200 WiFi router?

The guest network creation manner is simplistic and can be achieved by chasing a web interface login page from your tablet or mobile device or PC browser. It grants you to set up a separate network for your friends and families. It remains secure and safe from unknown people. Now catch these straightforward moves to configure your guest network.

Firstly, typewrite tplinkwifi.net from the web browser and fill in the two sections indicating the user name and passphrase. After submitting the info, bang login. Now reach the advanced option and go to guest network choice. Next, chase the wireless option. Following that, tick marks the option with 2.4 GHz or 5 GHz band. Choose to select SSID and customize it. We commend you for choosing the security WPA2 and setting up your own WiFi passcode. Finally, hit the save choice on the bottom of the interface. 

Review for TPLink AC1200 WiFi Router

I recently purchased this TPLink device from Amazon and installed it in my office. It is working absolutely fine. It supports a bundle of devices with its MU-MIMO feature. There is nothing wrong with speed. In fact, it gives the super fast speed of nearly 1200 MBps by both bands. However, the signal dropping issue occurs. Then I updated the firmware and it fixed that issue. Besides that, there is nothing going wrong with that router until I buy it. Regular firmware updates fix the bugs on the device. Overall, a good experience for me while surfing the internet connection. I highly commend the users willing to purchase the router at an effective price with a bundle of features and the fastest speed, then this will be the router for you. Just close your eyes and grab the deal.

Audio Not Working In SV3C Security Camera? Incredible Steps To Fix It

Challenges and Risks of Cloud Security 2022

in Tech
  ·   3 min read
find duplicate files

How to Delete Duplicate Files from Windows 10, 11 

in Tech
  ·   2 min read
Why are my screenshots blurry and of bad quality?

Why are my screenshots blurry and of bad quality?

in Tech
  ·   3 min read

One Reply to “How to Create a Guest Network on the TPLink AC1200 WiFi Router?”

Leave a Reply

Your email address will not be published.