In modern times, everyone has a mobile phone, without a mobile phone, a person’s life is incomplete. By using a mobile phone, a person can do a lot of work such as jobs, pass information, do gaming and video streaming, and also entertainment. Because in the mobile phone, many apps are available. Then you can use this app and truly enjoy their life. But to enjoy all the streaming & gaming apps the network connectivity is necessary. If the network connectivity is not available then you can enjoy all apps. If you wish to have all Apps on your mobile phone then you can connect your mobile phone to the network. For the mobile phone, you can install the Tplink MiFi router. Because this is a pocket router that you can take with you wherever you go.
Moreover, the wireless network signals are more stable & ultra-high. At the same time, 10 mobile devices easily access the network connectivity. But this router only works with SIM card connectivity. If the SIM card does not install then it does not provide the network. If you wish to enhance the wireless network signals then you should configure the advanced setting, by using tplinkmifi.net login you can easily configure the advanced setting in a quick manner.
Why is the USB LED to indicate the red light of the Tplink MiFi Router?
The Tp-link mobile WiFi router is specially designed for the mobile phone. You can easily take this router anywhere and enjoy the wireless network connectivity. Additionally, the LED indicator light will place on the front panel of the mobile router. With these lights, you can easily verify the status. If the charging LED indicates red light that means the charging power is too low. But many times, the USB LED light indicates red light. If the USB light is red then you cannot enjoy high-speed network signals. There are some causes due to LED indicating red light, which is as follows:
- Many devices will connect to the mobile router
- Faulty USB connection
- Mobile router firmware issue
- Virus issue
Remarkable solutions about USB LED Indicate Red Light Of Tplink MiFi Router
If the USB LED indicates red light then you should verify the issue. Because with this LED light you cannot enjoy high-speed network signals. But if the LED light is red then you should verify the issue. If the issue is common then you can try to resolve this issue manually. In the given below, there are some solutions to this issue.
Apply the USB cable connection instead of wireless connection
The wireless connection is not stable & correct to enjoy high-speed 4K streaming & gaming. If the USB LED light is red then you can use a wired connection. Because the USB cable connection is more strong & correct than the wireless connection. To make the USB cable connection, you can place your mobile device near the mobile router. Then, you can take a USB cable. You can smoothly plug the USB cable into an available USB port of your mobile router as well as your mobile phone. Then, turn ON the router and verify the LED light status. The USB LED light status is green.
Disconnect the extra mobile device
Many times, many mobile phones will connect to the mobile router then the USB LED light is solid red. If many mobile phones will connect to this router then you can disconnect them to resolve the issue. You can easily disconnect the extra device from this router. To disconnect the mobile phone, you can change the network password of this device. You can visit the setting and select the password option. Under this option, you can enter the new password in their field. After that, you can click the save option and absolutely save this setting.
Verify the Tplink MiFi router setting
Sometimes, the mobile router setting is wrong to configure then the USB LED light indicates red. If the USB light indicates red then you should verify the setting. By using the mobile router’s IP address, you can visit the login window. In this window, you can log in to the account by using the login default password. Then, you can visit the wireless setting of this mobile router. Under the wireless setting, you can select to verify the network. If the 5GHz network is disabled then you can enable it. You can also enable the wireless security to protect the router from the outsider & hackers. After configuring the wireless setting of the mobile router, you can click the save option. After that, the wireless setting will configure.
Reset the login password of the mobile router
To resolve the USB light issue, you can reset the login password. To reset the password, you visit tplinkmifi.net reset password. Then, you will show a reset option on the below side. You can smoothly click the reset option and then reset this password. After that, the issue will be resolved.
Check the mobile router version
Sometimes, the firmware of the mobile router is outdated and all lights indicate red light. To resolve the issue, you should check the firmware version. By using the default login IP you can access the login page. Then, you can log in to the account with a login password. Under the advanced setting, you can select the firmware option and then verify the firmware. If the firmware is outdated then you can update it.